FC610A One Optical One Electric 100Mbps Fiber Optic Converter
HiOSO FC610A is a 10/100Mbps adaptive fast Ethernet optical converter (also known as photoelectric media converter), which can convert 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. It extends the transmission distance of the network from the limit of 100m copper wire to 120Km(single-mode full-duplex mode). Support for two different network connection media types: 10/100Base-TX and 100Base-FX, through the use of switching technology and store-and-forward technology to achieve data transfer between the two network connection media. Supports dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC610A One Optical One Electric 100Mbps Fiber Optic Converter
- 网管: Non network management,All
- 电口数量: 1,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: Built-in power supply,External power supply,All
- 其他功能: None,All
HiOSO FC610A is a 10/100Mbps adaptive fast Ethernet optical converter (also known as photoelectric media converter), which can convert 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. It extends the transmission distance of the network from the limit of 100m copper wire to 120Km(single-mode full-duplex mode). Support for two different network connection media types: 10/100Base-TX and 100Base-FX, through the use of switching technology and store-and-forward technology to achieve data transfer between the two network connection media. Supports dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Features:
- It automatically adapts to 10Mbps and 100Mbps environments, facilitating network upgrades.
- It supports the 100Base-FX 100 Gigabit optical fiber transmission standard, and can be interoperable with other manufacturers that support the 100Base-FX 100 Gigabit standard
- Built-in high-efficiency switching core to achieve flow control and reduce broadcast packets.
- It supports full-duplex and half-duplex transmission modes, and can be negotiated automatically.
- It supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation
- It supports ultra-long packet transmission of up to 1552 bytes
- VLAN tags are supported for ultra-long packet transmission.
- Support QoS to ensure VOIP packet transmission
- It supports STP spanning tree to form a redundant network, with low power consumption, low heat generation, and stable operation for a long time.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
10/100Mbps fast optical Ethernet long-distance transmission network.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Multi-mode: 2Km, dual-fiber single-mode: 10/20/40/60/80/100/120Km, single-fiber single-mode: 10/20/40/60/80/100/120Km
, Category 5 twisted pair: 100mPort
1 RJ45 port: connect to STP/UTP Category 5 twisted pair
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage forwarding/pass-through
MAC address table
1k
Cache space
512Kbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
9.6us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PWR (Power Supply); FX LINK/ACT, FDX (FX full-duplex mode), TP LINK/ACT, TP 100 (100M transmission rate over twisted pair)
Power supply
DC 5V1A (external), AC 220V (built-in)
Power consumption
2W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted (complete machine), rack-mounted (module card)
Size
24mm(H)*59mm(W)*98mm(D)/H*W*D(external power supply);
26mm(H)*85mm(W)*135mm(D)/H*W*D(built-in power supply);
110mm(H)*22mm(W)*81mm(D)/H*W*D(Module Card)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10~20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.