FC650F Two Optical Three Electric 100Mbps Cascaded Fiber Optic Converter
The FC650F is a hundred-megabit two optical and three electrical cascade optical converter with two optical ports and three electrical ports. It can not only provide point-to-point, point-to-multipoint chain multi-node network structure, but also greatly improve the flexibility of the network. It extends the transmission distance of the network from the copper wire 100m limit to 120Km. And in each node provides 3 RJ45 interface directly connected to the terminal equipment, its small size, single/double fiber, flexible networking, low cost will become a major highlight of the use of converters, suitable for use in the highway network system, mine communication system and other chain multi-point network.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC650F Two Optical Three Electric 100Mbps Cascaded Fiber Optic Converter
- 网管: Non network management
- 电口数量: 2
- 电口带宽: 100 megabytes
- 光口数量: 2
- 光口带宽: 100 megabytes
- POE: No POE support
- 电源: External power supply
- 其他功能: Support cascade
The FC650F is a hundred-megabit two optical and three electrical cascade optical converter with two optical ports and three electrical ports. It can not only provide point-to-point, point-to-multipoint chain multi-node network structure, but also greatly improve the flexibility of the network. It extends the transmission distance of the network from the copper wire 100m limit to 120Km. And in each node provides 3 RJ45 interface directly connected to the terminal equipment, its small size, single/double fiber, flexible networking, low cost will become a major highlight of the use of converters, suitable for use in the highway network system, mine communication system and other chain multi-point network.
Features:
- Two 100Base-FX standard 100 Gigabit optical ports are provided, which can be cascaded and networked in a chain-like structure
- Built-in efficient switching core to reduce broadcast packets
- Three independent 10/100Base-TX standard 100 Gigabit adaptive twisted pair ports are provided
- It supports full-duplex and half-duplex transmission modes, and can be negotiated automatically.
- It supports ultra-long packet transmission of up to 1552 bytes
- Support QoS to ensure VOIP packet transmission
- STP spanning trees are supported to form a redundant network
- Low power consumption, low heat generation, and stable work for a long time.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
10/100Mbps 100 Mbps Ethernet fiber cascade long-distance transmission network.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km, dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120KmCategory
5 twisted pair: 100mPort
3 RJ45 ports: connected to STP/UTP Category 5 twisted pair cables, 2 optical fiber ports:
Multimode—SC or ST (fiber size 50, 62.5/125μm), Singlemode—SC/FC fiber port (fiber size 9/125μm), Single-fiber single-mode—SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage and forwarding
MAC address table
1 K
Cache space
512Kbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
9.6us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
POWER, FX1/FX2 LINK/ACT, FX1/FX2 100, TP1/2/3 LINK/ACT, TP1/2/3 LINK/ACT, TP1/2/3 100, 1/2/3 twisted pair, 100M
Power supply
DC 5V1A (External)
Power consumption
3D
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted
Size
26mm(H)*70mm(W)*98mm(D) / H*W*D(External Power Supply)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page