Home page

FC760F Two Optical Four Electric Gigabit Cascade Fiber Optic Converter

FC760F Two Optical Four Electric Gigabit Cascade Fiber Optic Converter

FC760F is a gigabit optical four-electric cascade optical converter, double gigabit optical port, four hundred gigabit electrical port design, not only can provide point-to-point, point-to-multipoint chain multi-node network structure, greatly improve the flexibility of the network, it will extend the network transmission distance from the copper wire 100m limit to 120Km. And in each node provides 4 RJ45 interface directly connected to the terminal equipment, its small size, single/double fiber, flexible networking, low cost will become a major highlight of the use of converters, suitable for use in the highway network system, mine communication system and other chain multi-point network.

Key words:

Classification:

Products

Fiber Media Converter

General-purpose Converter

Service Hotline:

+86 755-83110049

Messages

Product Description
Technical parameter

- Commodity name: FC760F Two Optical Four Electric Gigabit Cascade Fiber Optic Converter
- 网管: Non network management,All
- 电口数量: 4,All
- 电口带宽: 100 megabytes,All
- 光口数量: 2,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: Support cascade,All
FC760F is a gigabit optical four-electric cascade optical converter, double gigabit optical port, four hundred gigabit electrical port design, not only can provide point-to-point, point-to-multipoint chain multi-node network structure, greatly improve the flexibility of the network, it will extend the network transmission distance from the copper wire 100m limit to 120Km. And in each node provides 4 RJ45 interface directly connected to the terminal equipment, its small size, single/double fiber, flexible networking, low cost will become a major highlight of the use of converters, suitable for use in the highway network system, mine communication system and other chain multi-point network.
Features:
- Two 1000Base-SX/LX standard gigabit optical ports are provided, which can be cascaded and networked in a chain structure
- Built-in efficient switching core to reduce broadcast packets
- Four independent 10/100Base-TX standard 100 Gigabit adaptive twisted pair ports are provided
- It supports full-duplex and half-duplex transmission modes, and can be negotiated automatically.
- It supports ultra-long packet transmission of up to 1552 bytes
- Support QoS to ensure VOIP packet transmission
- STP spanning trees are supported to form a redundant network
- Low power consumption, low heat generation, and stable work for a long time.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:

10/100Mbps 100 Gigabit Ethernet access, Gigabit fiber cascading long-distance transmission network.

Parameter	Specification
Access mode	The electrical port is 10/100Mbps, and the cascaded optical port is 1000Mbps
Standard	IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet,IEEE802.3ab 1000Base-T、IEEE802.3z 1000Base-SX/LX Gigabit Ethernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength	850nm/1310nm/1490nm/1550nm
Transmission distance	Dual-fiber multimode: 220m (fiber size 62.5/125μm)/550m (fiber size 50/125μm), dual-fiber single-mode: 10/20/40/60/80/100/120Km, single-fiber single-mode: 10/20/40/60/80/100/120Km, Category 5 twisted pair: 100m
Port	4 RJ45 ports: 100Mbps connection to STP/UTP Category 5 twisted pair; 2 fiber ports: 1000Mbps multimode—SC or ST (fiber size 50, 62.5/125μm), singlemode—SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode—SC/FC fiber port (fiber size 9/125μm)
Conversion method	Media conversion, storage and forwarding
MAC address table	8K
Cache space	1Mbit
Flow control	Full dual state: flow control, half-duplex state: back pressure mode
Delay	9.6us
Ber	<1/1000000000
MTBF	100,000 hours
LED indicator	PWR (Power Supply); FX1/FX2 LINK/ACT;TP1/2/3/4LNK/ACT(1/2/3/4 Port Twisted Pair Connection)TP1/2/3/4 100 (1/2/3/4 Port Twisted Pair 100M Transmission Rate)
Power supply	DC 12V1A (External)
Power consumption	5W
Operating temperature	-10~55℃
Operating humidity	5%~90%
Storage temperature	-40~80℃
Store humidity	5%~90% non-condensing
Installation	Wall-mounted
Size	26mm (H)× 96mm(W)×120mm (D) / H×W×D (External Power Supply)

Related Products

HA7301GD Mini 1-Port GPON OLT

Learn more

HA7302GD 2PON GPON OLT

The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .

Learn more

HA7302CS HIOSO PIZZA BOX 2PON EPON OLT

HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.

Learn more