FC830AB One Optical Two Electric Intelligent Fiber Optic Converter
HiOSO FC830AB is an intelligent 10/100M adaptive fast Ethernet optical converter (also known as photoelectric dielectric converter). 10Base-T and 100Base-TX twisted pair electrical signals can be converted to 100Base-FX optical signals. It extends the transmission distance of the network from the copper wire limit of 100 meters to 120Km, and realizes the data transmission between the two network connection media of photoelectric by using the data link 2-layer store-and-forward mode. The maximum transmission distance is 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC830AB One Optical Two Electric Intelligent Fiber Optic Converter
- 网管: Non network management,All
- 电口数量: 2,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: External power supply,Built-in power supply,Rack power supply,All
- 其他功能: None,All
HiOSO FC830AB is an intelligent 10/100M adaptive fast Ethernet optical converter (also known as photoelectric dielectric converter). 10Base-T and 100Base-TX twisted pair electrical signals can be converted to 100Base-FX optical signals. It extends the transmission distance of the network from the copper wire limit of 100 meters to 120Km, and realizes the data transmission between the two network connection media of photoelectric by using the data link 2-layer store-and-forward mode. The maximum transmission distance is 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Features:
- Automatically adapts to 10Mbps and 100Mbps environments, facilitating network upgrades.
- It supports the 100Base-FX 100 Gigabit optical fiber transmission standard, and can be interoperable with other manufacturers that support the 100Base-FX 100 Gigabit standard
- Built-in high-efficiency switching core to achieve flow control and reduce broadcast packets.
- Two independent 10/100Base-TX standard 100 Gigabit adaptive switched twisted pair ports are provided to achieve electrical port backup.
- It supports full-duplex and half-duplex transmission modes, and can be negotiated automatically. It supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation
- It supports low-latency transmission and ultra-long packet transmission of up to 1600 bytes.
- It supports VLAN ultra-long packet transmission, QoS, VOIP packet transmission, and STP spanning tree to form a redundant network.
- Ultra-low power consumption, low heat generation, and stable work for a long time.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users.
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
Telecom 10/100Mbps 100 Gigabit Ethernet fiber long-distance transmission network.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km, dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m
Port
2 RJ45 ports: connect STP/UTP Category 5 twisted pair cables
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage forwarding/pass-through
MAC address table
1 K
Cache space
512Kbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
9.6us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PRW (Power Supply), FX LINK/ACT (Optical Fiber Connection/Operation), FDX (FX Full-Duplex Mode), TP1/2 LINK/ACT (Twisted Pair Connection/Operation), TP 1/2 100 (Twisted Pair 100M Transmission Rate)
Power supply
DC 5V1A (External)
Power consumption
<2W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted (complete machine), rack-mounted (module card)
Size
26mm(H)*86mm(W)*93mm(D)/H*W*D(External Power Supply)
110mm(H)*22mm(W)*81mm(D) / H*W*D(Module Card)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page