FC830AG one optical one electrical gigabit fiber optic converter
HiOSO FC830AG is 100/1000M adaptive Ethernet fiber converter (also known as photoelectric media converter), dual fiber FC830AG has a unique optical signal detection function indicator. Comply with IEEE802.3, IEEE802.3U, IEEE802.3z, IEEE802.3AB standards. Two types of media network connections are supported: 10Base-T, 100Base-TX, 1000Base-T and 1000Base-SX/LX. 10Base-T, 100Base-TX, or 1000Base-T twisted pair electrical signals can be converted to 1000Base-SX/ LX-ray signals. The maximum transmission distance is 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC830AG one optical one electrical gigabit fiber optic converter
- 网管: Non network management,All
- 电口数量: 1,All
- 电口带宽: Kilomega,All
- 光口数量: 1,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: External power supply,Built-in power supply,Rack power supply,All
- 其他功能: None,All
HiOSO FC830AG is 100/1000M adaptive Ethernet fiber converter (also known as photoelectric media converter), dual fiber FC830AG has a unique optical signal detection function indicator. Comply with IEEE802.3, IEEE802.3U, IEEE802.3z, IEEE802.3AB standards. Two types of media network connections are supported: 10Base-T, 100Base-TX, 1000Base-T and 1000Base-SX/LX. 10Base-T, 100Base-TX, or 1000Base-T twisted pair electrical signals can be converted to 1000Base-SX/ LX-ray signals. The maximum transmission distance is 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Features:
- It automatically adapts to 10Mbps, 100Mbps, and 1000Mbps environments, facilitating network upgrades.
- It supports the 1000Base-SX/LX gigabit optical fiber transmission standard, and can be interoperable with other manufacturers that support the 1000Base-SX/LX gigabit standard.
- Built-in high-efficiency switching core to achieve flow control and reduce broadcast packets.
- It supports full-duplex and half-duplex transmission modes, can negotiate automatically, and supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation.
- The dual-fiber device supports the optical signal detection function, and the SD optical signal detection indicator can determine which fiber is faulty
- It supports ultra-long packet transmission up to 10KBytes and VLAN packet transmission.
- It supports QoS, ensures the transmission of VOIP packets, and supports STP spanning tree to form a redundant network.
- Ultra-low power consumption, low heat generation, and stable work for a long time.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users.
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
Telecom 100/1000Mbps Gigabit Ethernet fiber long-distance transmission network.
-
Parameter
Specification
Access mode
100/1000Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T、IEEE802.3z 1000Base-SX/LX Gigabit Ethernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Multimode: 220m (fiber size 62.5/125μm) / 550m (fiber size 50/125μm)
Dual-fiber single-mode: 10/20/40/60/80/100/120Km, single-fiber single-mode: 10/20/40/60/80/100/120KmCategory
5 twisted pair: 100mPort
1 RJ45 port: connect to STP/UTP Category 5 twisted pair cables
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage forwarding/pass-through
MAC address table
1K
Cache space
1M
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
<1us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PRW (Power Supply), FX LINK/ACT (Fiber Optic Connection/Act), FX SD (Optical Signal Detection Light), TP LINK/ACT (Twisted Pair Connection/Act), TP 1000 (Twisted Pair 1000M Transmission Rate), TP 100 (Twisted Pair 100M Transmission Rate, External Power Supply Only)
Power supply
DC 5V1A (external), AC 220V (built-in)
Power consumption
<2.5W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted (complete machine), rack-mounted (module card)
Size
26mm(H)*71mm(W)*95mm(D)/H*W*D(external power supply);
38mm(H)*118mm(W)*152mm(D)/H*W*D(built-in power supply);
110mm(H)*22mm(W)*81mm(D)/H*W*D(Module Card)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page