FC830AEM one optical four electric 100 Mbps network management fiber optic converter
The FC830AEM series is a 10/100M adaptive Ethernet optical converter that supports SNMP, WEB, TELNET, and serial port network management. The FC830AMC is an office converter module inserted into the FTC-16M rack, and the FC830EM is a remote desktop converter. The iCoreView network management system enables you to monitor the working status and configure the mode of the office and remote optical converters. The FC830EM series provides users with four electrical ports and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC830AEM one optical four electric 100 Mbps network management fiber optic converter
- 网管: Network management,All
- 电口数量: 4,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: Rack power supply,Built-in power supply,External power supply,All
- 其他功能: Support port isolation,All
The FC830AEM series is a 10/100M adaptive Ethernet optical converter that supports SNMP, WEB, TELNET, and serial port network management. The FC830AMC is an office converter module inserted into the FTC-16M rack, and the FC830EM is a remote desktop converter. The iCoreView network management system enables you to monitor the working status and configure the mode of the office and remote optical converters. The FC830EM series provides users with four electrical ports and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Features:
- The graphical management interface based on the web address SNMP protocol can be plugged into the FTC-16M rack, supports hot swapping, and supports local and remote link failure alarm (LFA) configurations.
- It has 10M/100M, half-duplex/full-duplex adaptive function.
- It has a store-and-forward buffer, which effectively improves the transmission efficiency of the termination equipment, realizes error detection, flow control, and reduces broadcast packets.
- It supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation, and supports low-latency transmission.
- It supports ultra-long packet transmission up to 2047 bytes and VLAN ultra-long packet transmission.
- It supports QoS, ensures the transmission of VOIP packets, and supports STP spanning tree to form a redundant network.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users.
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
Telecom 10/100Mbps managed 100 Gigabit Ethernet optical fiber long-distance transmission network.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km Dual-fiber single-mode: 25/40/60/80/100/120Km
Single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m
Port
4 RJ45 ports: connect STP/UTP Category 5 twisted pair cables
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage forwarding/pass-through
MAC address table
2K
Cache space
512Kbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
Store and forward: 9.6us, through: 0.9us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
External power supply: PRW (power supply); FX LINK/ACT, TP1/2/3/4 LINK/ACT, Module Card/Built-in Power Supply: PRW (Power), FX LINK/ACT, TP1/2/3/4 LINK/ACT, TP1/2/3/4 100 (100M Twisted Pair)
Power supply
DC 12V1A, AC 220V (built-in)
Power consumption
<2W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted (complete machine), rack-mounted (module card)
Size
128mm(H)*25mm(W)*152mm(D) / H*W*D(Module Card)
28mm(H) *120mm(W) *106mm(D) / H*W*D(External Power Supply)
38 mm(H) *218mm(W) * 176mm(D) / H*W*D (built-in power supply)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10~20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.