FC650M one optical four electric 100 Mbps network management fiber optic converter
The FC650M series is a 100 Mbit/s Ethernet optical converter that supports WEB and TELNET network management. The FC650M provides four 10/100Mbps 100 Mbit/s network ports and one 100Base-FX 100 Mbit/s optical port. You can configure the working mode, bandwidth, VLAN, QoS, and broadcast storm suppression for each network port on the network management system.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC650M one optical four electric 100 Mbps network management fiber optic converter
- 网管: Network management,All
- 电口数量: 4,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: Support port isolation,All
The FC650M series is a 100 Mbit/s Ethernet optical converter that supports WEB and TELNET network management. The FC650M provides four 10/100Mbps 100 Mbit/s network ports and one 100Base-FX 100 Mbit/s optical port. You can configure the working mode, bandwidth, VLAN, QoS, and broadcast storm suppression for each network port on the network management system.
Features:
- It supports multiple network management modes such as WEB and TELNET.
- It supports port working mode configuration and MAC address learning control.
- IEEE 802.1q VLAN configuration is supported, and up to 16 VLAN groups are supported.
- It supports ultra-long packet transmission up to 2047Bytes and VLAN packet transmission.
- It supports IEEE802.1p QoS and provides three priority policies: port priority, VLAN priority, and DSCP priority.
- The bandwidth configuration of the port is supported.
- IGMP multicast, port mirroring, and broadcast storm suppression are supported.
- Port traffic statistics are supported.
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
4-port 10/100Mbps managed 100 Gigabit Ethernet optical fiber long-distance transmission network.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km Dual-fiber single-mode: 25/40/60/80/100/120Km
Single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m
Port
4 RJ45 ports: 1 optical fiber port connected to STP/UTP Category 5 twisted pair cable: SC/ST/FC
Conversion method
Media conversion, storage and forwarding
MAC address table
2K
Cache space
512Kbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
9.6us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PWR (Power Supply); FXL LINK/ACT, TP1/2/3/4 LINK/ACT, TP1/2/3/4 100 FXL 100 (100M fiber), RUN
power supply
DC 5V1A (External)
power consumption
5W
Operating temperature
-10~55℃
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted
Size
26mm (H)× 96mm(W)×120mm (D) / H×W×D (External Power Supply)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10~20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.