FC830AGM one optical one electrical gigabit network management fiber optic converter
The FC830AGM series is a network management 100/1000Mbps adaptive Gigabit Ethernet optical converter, supporting SNMP, WEB, TELNET, serial port and a variety of network management modes. The FC830AGMC is a local converter module card inserted into the FTC-16M rack, and the FC830AGM is a remote desktop converter. Through the iCoreView network management system, you can monitor the working status and configure the mode of the local optical converter module card and the connected remote optical converter on each slot. The FC830AGM series provides users with one electrical port and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC830AGM one optical one electrical gigabit network management fiber optic converter
- 网管: Network management,All
- 电口数量: 1,All
- 电口带宽: Kilomega,All
- 光口数量: 1,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: Rack power supply,Built-in power supply,External power supply,All
- 其他功能: Support port isolation,All
The FC830AGM series is a network management 100/1000Mbps adaptive Gigabit Ethernet optical converter, supporting SNMP, WEB, TELNET, serial port and a variety of network management modes. The FC830AGMC is a local converter module card inserted into the FTC-16M rack, and the FC830AGM is a remote desktop converter. Through the iCoreView network management system, you can monitor the working status and configure the mode of the local optical converter module card and the connected remote optical converter on each slot. The FC830AGM series provides users with one electrical port and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.
Features:
- The graphical management interface based on WEB address and SNMP protocol can be plugged into FTC-16M racks and supports hot swapping.
- It supports local and remote link failure alarm (LFA) configurations, and has 10M/100/1000M, half-duplex/full-duplex adaptive functions.
- It has a store-and-forward buffer, which effectively improves the transmission efficiency of the termination equipment, realizes error detection, flow control, and reduces broadcast packets.
- It supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation, and supports low-latency transmission.
- It supports ultra-long packet transmission up to 10KBytes and VLAN packet transmission.
- It supports QoS, ensures the transmission of VOIP packets, and supports STP spanning tree to form a redundant network.
- It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users.
- The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.
Apply:
Telecom 100/1000Mbps Gigabit Ethernet fiber long-distance transmission network.
-
Parameter
Specification
Access mode
100/1000Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T、IEEE802.3z 1000Base-SX/LX Gigabit Ethernet,IEEE802.1qVLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multimode: 220m (fiber size 62.5/125μm)/550m (fiber size 50/125μm),
Dual-fiber single-mode: 10/20/40/60/80/100/120Km, single-fiber single-mode: 10/20/40/60/80/100/120Km
Category 5 twisted pair: 100m
Port
1 RJ45 port: connect to STP/UTP Category 5 twisted pair cables
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage and forwarding
MAC address table
1 K
Cache space
1Mbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
<1us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PWR (Power Supply); T1000 (1000M transmission rate of electrical port), TPL (electrical port connection/action), TPD (electrical port full duplex mode), FXL (optical port connection/action), FXD (optical port full duplex mode), RLNK (remote electrical port connection/operation) (module card), RSPD (remote electrical port 1000M transmission rate) (module card)
Power supply
DC 12V1A (external), AC 220V (built-in)
Power consumption
3D
Operating temperature
-10～55℃
Operating humidity
5%～90%
Storage temperature
-40～80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted (complete machine), rack-mounted (module card)
Size
128mm(H)*25mm(W)*152mm(D) / H*W*D(Module Card)
26 mm(H) *109mm(W) *152mm(D) / H*W*D(External Power Supply)
38 mm(H) *218mm(W) * 176mm(D) / H*W*D (built-in power supply)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page