FC520BG one optical and two electrical gigabit security industrial grade high-definition fiber optic converter
FC520BG Gigabit series security industrial high-definition optical fiber converter is specially designed for network high-definition cameras and network access control system design and development of optical fiber transmission equipment, can ensure the stable transmission of high-definition network video stream. The FC520BG series uses optical fiber as the carrier to convert HD network electrical signals into optical signals and carry out long-distance transmission. It can be used with the FTC-17 chassis for integrated cabling in the central control room. The FC520BG series security industrial-grade HD fiber optic converter provides two HD network interfaces that can be used to connect to the HD webcam or network access control series. FC520BG series security industrial-grade high-definition optical fiber converter can be used alone, or can be used with FTC-17 series chassis for integrated wiring in the central control room.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC520BG one optical and two electrical gigabit security industrial grade high-definition fiber optic converter
- 网管: Non network management,All
- 电口数量: 2,All
- 电口带宽: Kilomega,All
- 光口数量: 1,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: None,All
FC520BG Gigabit series security industrial high-definition optical fiber converter is specially designed for network high-definition cameras and network access control system design and development of optical fiber transmission equipment, can ensure the stable transmission of high-definition network video stream. The FC520BG series uses optical fiber as the carrier to convert HD network electrical signals into optical signals and carry out long-distance transmission. It can be used with the FTC-17 chassis for integrated cabling in the central control room. The FC520BG series security industrial-grade HD fiber optic converter provides two HD network interfaces that can be used to connect to the HD webcam or network access control series. FC520BG series security industrial-grade high-definition optical fiber converter can be used alone, or can be used with FTC-17 series chassis for integrated wiring in the central control room.
Features:
- It adopts a unique switch chip design suitable for high-definition network video streaming.
- The high-speed storage and forwarding access of 6G bandwidth is conducive to the stable transmission of high-definition network video streams.
- It supports the 1000Base-SX/LX optical fiber transmission standard, and can be interoperable with other manufacturers that support the 1000Base-SX/LX optical fiber transmission standard.
- The electrical port supports 100/1000Mbps and full-duplex/half-duplex auto-negotiation.
- It supports ultra-long packet transmission up to 10KBytes and VLAN packet transmission.
- It supports flow control, QoS, and STP survival tree packet transmission, and the maximum transmission distance can reach 120 kilometers.
- The dual-fiber device supports the optical signal detection function, and the SD optical signal detection indicator can determine which fiber is faulty.
- 1M built-in cache capacity, 1K built-in MAC address cache space.
- The electric port strengthens the lightning protection design, low power consumption, low heat generation, and can work stably for a long time.
- Dual redundant input power ports are provided for improved reliability.
- The design of the wall-mounted side iron shell external power supply is conducive to device installation, heat dissipation and miniaturization.
Apply:
Dual-port 100/1000Mbps Gigabit HD video surveillance Ethernet optical fiber long-distance transmission network.
-
Parameter
Specification
Access mode
100/1000Mbps
Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3ab1000Base-T、IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.3x Flow Control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multimode: 220m (fiber size 62.5/125um) / 550m (fiber size 50/125um)
Double fiber single mode:10/20/40/60/80/100/120Km,Single fiber single mode:10/20/40/60/80/100Km/120Km
Five types of twisted pair: 100mPort
2 RJ45 ports: connect STP/UTP Category 5 twisted pair cables
1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method
Media conversion, storage and forwarding
MAC address table
1 K
Cache space
1Mbit
Flow control
Full dual state: flow control, half-duplex state: back pressure mode
Delay
<1us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
PWR (Power Supply); FX LINK/ACT, FX SD (Optical Signal Detection), TP1/2 LINK/ACT, TP1/2 1000 (1000M Twisted Pair)
Power supply
DC 12V dual-input redundant backup
Power consumption
<3W
Operating temperature
Normal: -10~60°C, Wide temperature: -40~85°C
Operating humidity
5%~90%
Storage temperature
-40~80℃
Store humidity
5%~90% non-condensing
Installation
Wall-mounted
Size
26mm(H)*107mm(W)*93mm(D)/H*W*D(External Power Supply)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page