FC540A One Optical One Electrical 100M Rail Industrial Grade Fiber Optic Converter
The FC540A series is a single-port industrial Ethernet optical converter that converts 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. The FowayFC540A series fiber optic converters offer two 9.6~60VDC, 18~30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the FowayFC540A can operate at temperatures from -40 to 85°C and has an IP40 protection rating, making it suitable for any industrial environment. The FowayFC540A features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.
Key words:
Classification:
Service Hotline:
- Product Description
- Technical parameter
-
- Commodity name: FC540A One Optical One Electrical 100M Rail Industrial Grade Fiber Optic Converter
- 网管: Non network management,All
- 电口数量: 1,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: None,All
The FC540A series is a single-port industrial Ethernet optical converter that converts 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. The FowayFC540A series fiber optic converters offer two 9.6~60VDC, 18~30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the FowayFC540A can operate at temperatures from -40 to 85°C and has an IP40 protection rating, making it suitable for any industrial environment. The FowayFC540A features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.
Features:
- The electrical port is 10/100M self-adaptive, with MDI and MDI-X automatic identification function, automatic detection, automatic learning, and good compatibility
- Provide two redundant wide voltage 9.6~60VDC, 18~30VAC input
- Provides reverse polarity protection
- It supports ultra-long packet transmission of up to 1552 bytes
- Dial down the DIP switch 1 to enable broadcast storms, and dial up to disable broadcast storms
- It has a rugged IP40 metal housing
- It can be installed on rails or in distribution cabinets
Apply:
10/100Mbps 100 Mbps Ethernet fiber long-distance transmission network for industrial sites.
-
Parameter
Specification
Access mode
10/100Mbps
Standard
IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE 802.3x Flow Control,IEEE802.1d Spanning Tree,IEEE802.1q vlan,IEEE802.1p Qos
Wavelength
850nm/1310nm/1490nm/1550nm
Transmission distance
Dual-fiber multi-mode: 2Km, dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120Km
Category 5 twisted pair: 100m
Port
1 RJ45 port: connect to STP/UTP Category 5 twisted pair cables
1 fiber port: dual-fiber multi-mode-SC or ST (fiber size 50, 62.5/125um)
Dual-fiber single-mode-SC/FC fiber port (fiber size 9/125um)
Single-fiber single-mode-SC/FC fiber port (fiber size 9/125um)
Conversion method
Media conversion, storage and forwarding
MAC address table
1K
Cache space
1Mbit
Flow control
Full-duplex state: flow control, half-duplex state: back pressure mode
Delay
9.6us
Ber
<1/1000000000
MTBF
100,000 hours
LED indicator
FX LINK, TP 100M (100M TWISTED PAIR RATE), TP LINK (Twisted Pair Connection/Action) ;P 1 (Power P1 Access), P2 (Power P2 Connection)
Power supply
12/24/48 VDC, 18~30VAC dual redundant power inputs
Power consumption
2W
Operating temperature
Normal: -10~60°C, Wide temperature: -40~85°C
Operating humidity
5%～90%
Storage temperature
-40℃～85℃
Store humidity
5%~95% (non-condensing)
Installation
Rail mounting, wall mounting
Size
115mm×30mm×70mm(H * W * D)
Related Products
The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .
HA7302CS HIOSO PIZZA BOX 2PON EPON OLT
HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.
HiOSO Technology Co., Ltd
4F, Building 10, Nangang Second Industrial Zone, No.1026 Songbai Road, Xili Street, Nanshan District, Shenzhen
+86 13410317452 +86 13760140712
Copyright©2023 HiOSO Technology Co., Ltd. Technical Support:China Enterprise Power Shenzhen SEO
SAF Coolest v1.2 设置面板 NDFSX-ZWAF-BEXAE-SSE
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page