Home page

FC540AG one optical one electrical gigabit rail industrial grade fiber optic converter

FC540AG one optical one electrical gigabit rail industrial grade fiber optic converter

The FC540AG series is a single-port industrial Ethernet optical converter that converts 10Base-T, 100Base-TX and 1000Ba se-T twisted pair electrical signals to 1000Base-SX/ LX-ray signals. The FowayFC540AG series fiber optic converters offer two 9.6~60VDC, 18~30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the FowayFC540AG can operate at temperatures from -40 to 85°C and has IP40 protection rating, making it suitable for any industrial environment. The FowayFC540AG features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.

Key words:

Classification:

Products

Fiber Media Converter

Din Rail Converter

Service Hotline:

+86 755-83110049

Messages

Product Description
Technical parameter

- Commodity name: FC540AG one optical one electrical gigabit rail industrial grade fiber optic converter
- 网管: Non network management,All
- 电口数量: 1,All
- 电口带宽: Kilomega,All
- 光口数量: 1,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: None,All
The FC540AG series is a single-port industrial Ethernet optical converter that converts 10Base-T, 100Base-TX and 1000Ba se-T twisted pair electrical signals to 1000Base-SX/ LX-ray signals. The FowayFC540AG series fiber optic converters offer two 9.6~60VDC, 18~30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the FowayFC540AG can operate at temperatures from -40 to 85°C and has IP40 protection rating, making it suitable for any industrial environment. The FowayFC540AG features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.
Features:
- The electrical port is 100/1000M self-adaptive, with MDI and MDI-X automatic identification function, automatic detection, automatic learning, and good compatibility
- Two redundant wide voltage 9.6 ~ 60 VDC, 18 ~ 30VAC inputs are provided
- Provides reverse polarity protection
- It supports ultra-long packet transmission up to 1536 bytes
- Dial down the DIP switch 1 to enable broadcast storms, and dial up to disable broadcast storms
- It has a rugged IP40 metal housing
- It can be installed on rails or in distribution cabinets
Apply:

10/100Mbps 100 Mbps Ethernet fiber long-distance transmission network for industrial sites.

Parameter	Specification
Access mode	10/100Mbps
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.1d Spanning Tree Protocol,IEEE802.1w Rapid STP,IEEE802.1s Multiple STP,IEEE802.1q Vlan,IEEE802.1p QoS,IEEE802.3ad Trunk,IEEE802.3X Flow Control
Wavelength	850nm/1310nm/1490nm/1550nm
Transmission distance	Dual-fiber multi-mode: 2Km, dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m
Port	4 RJ45 ports: connect to STP/UTP Category 5 twisted pair cables 1 fixed FX fiber port: dual-fiber multi-mode-SC or ST (fiber size 50, 62.5/125um), Dual-fiber single-mode-SC/FC fiber port (fiber size 9/125um), single-fiber single-mode-SC/FC fiber port (fiber size 9/125um)
Conversion method	Media conversion, storage and forwarding
MAC address table	1K
Cache space	1Mbit
Flow control	Full-duplex state: flow control, half-duplex state: back pressure mode
Delay	9.6us
Ber	<1/1000000000
MTBF	100,000 hours
LED indicator	Fiber Link, 100M (100M twisted pair rate), Link;P 1 (Power P1 access), P2 (Power P2 access)
Power supply	12/24/48 VDC,18 ~ 30vac power input
Power consumption	3W
Operating temperature	Normal: -10°C~60°C;-T wide temperature: -40°C~85°C
Operating humidity	5%～90%
Storage temperature	-40℃～85℃
Store humidity	5%~95% (non-condensing)
Installation	Rail mounting, wall mounting
Size	115mm×30mm×70mm(H * W * D)

Related Products

HA7301GD Mini 1-Port GPON OLT

Learn more

HA7302GD 2PON GPON OLT

The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .

Learn more

HA7302CS HIOSO PIZZA BOX 2PON EPON OLT

HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.

Learn more