Home page

FC540E industrial grade fiber optic converter with one optical, four electrical, and 100 Mbps rail type

FC540E industrial grade fiber optic converter with one optical, four electrical, and 100 Mbps rail type

The FC540E series is a 4-port industrial Ethernet optical converter that converts 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. The Foway FC540E series fiber optic converters provide two 9.6 ~ 60 VDC, 18 ~ 30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the Foway FC540E converter can operate at temperatures from -40 to 85°C and has an IP40 protection rating, making it suitable for any industrial environment. The Foway FC540E features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.

Key words:

Classification:

Products

Fiber Media Converter

Din Rail Converter

Service Hotline:

+86 755-83110049

Messages

Product Description
Technical parameter

- Commodity name: FC540E industrial grade fiber optic converter with one optical, four electrical, and 100 Mbps rail type
- 网管: Non network management,All
- 电口数量: 4,All
- 电口带宽: 100 megabytes,All
- 光口数量: 1,All
- 光口带宽: 100 megabytes,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: None,All
The FC540E series is a 4-port industrial Ethernet optical converter that converts 10Base-T and 100Base-TX twisted pair electrical signals to 100Base-FX optical signals. The Foway FC540E series fiber optic converters provide two 9.6 ~ 60 VDC, 18 ~ 30VAC redundant power inputs that can be connected to both DC and AC power supplies. In addition, the Foway FC540E converter can operate at temperatures from -40 to 85°C and has an IP40 protection rating, making it suitable for any industrial environment. The Foway FC540E features a dip switch that enables or disables broadcast storm protection, providing another flexible solution for different industrial applications.
Features:
- The electrical port is 10/100M self-adaptive, with MDI and MDI-X automatic identification function, automatic detection, learning, and good compatibility
- The optical port is 100M, with good interoperability, supporting multi-mode, dual-fiber single-mode and single-fiber single-mode fibers, with a connection distance of up to 120 kilometers
- Two wide voltage 10 ~ 60 VDC, 18 ~ 30VAC inputs are provided, and reverse polarity protection is provided
- It supports packet transmission of ultra-long frames up to 1552 bytes
- Dial down the DIP switch 1 to enable broadcast storms, and dial up to disable broadcast storms
- Each RJ45 electrical port adds an anti-high-voltage circuit to improve the lightning protection and anti-high-voltage interference ability
- It has a rugged IP40 metal enclosure and can be mounted on rails or on a wall
Apply:

Industrial site four-port 10/100Mbps 100 Mbps 100 Gigabit Ethernet optical fiber long-distance transmission network.

Parameter	Specification
Access mode	10/100Mbps
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.1d Spanning Tree Protocol,IEEE802.1w Rapid STP,IEEE802.1s Multiple STP,IEEE802.1q Vlan,IEEE802.1p QoS,IEEE802.3ad Trunk,IEEE802.3X Flow Control
Wavelength	850nm/1310nm/1490nm/1550nm
Transmission distance	Dual-fiber multi-mode: 2Km, dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m
Port	4 RJ45 ports: connect to STP/UTP Category 5 twisted pair cables 1 fixed FX fiber port: dual-fiber multi-mode-SC or ST (fiber size 50, 62.5/125um), Dual-fiber single-mode-SC/FC fiber port (fiber size 9/125um), single-fiber single-mode-SC/FC fiber port (fiber size 9/125um)
Conversion method	Media conversion, storage and forwarding
MAC address table	1K
Cache space	1Mbit
Flow control	Full-duplex state: flow control, half-duplex state: back pressure mode
Delay	9.6us
Ber	<1/1000000000
MTBF	100,000 hours
LED indicator	Fiber Link, 100M (100M twisted pair rate), Link;P 1 (Power P1 access), P2 (Power P2 access)
Power supply	12/24/48 VDC,18 ~ 30vac power input
Power consumption	3W
Operating temperature	Normal: -10°C~60°C;-T wide temperature: -40°C~85°C
Operating humidity	5%～90%
Storage temperature	-40℃～85℃
Store humidity	5%~95% (non-condensing)
Installation	Rail mounting, wall mounting
Size	115mm×30mm×70mm (H * W * D)

Related Products

HA7301GD Mini 1-Port GPON OLT

Learn more

HA7302GD 2PON GPON OLT

The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .

Learn more

HA7302CS HIOSO PIZZA BOX 2PON EPON OLT

HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.

Learn more