Home page

FC520EGM one optical four grid tube type gigabit security industrial grade isolated high-definition fiber optic converter

FC520EGM one optical four grid tube type gigabit security industrial grade isolated high-definition fiber optic converter

FC520EGM series network management security industrial-grade isolated optical fiber converter is specially designed and developed for network high-definition cameras and network access control systems, which can ensure the stable transmission of high-definition network video streams. The FC520EGM series uses optical fiber as the carrier to convert HD network electrical signals into optical signals and carry out long-distance transmission. It can be used with TC-16M chassis for integrated cabling in central control room. The FC520EGM series of managed security industrial-grade isolated fiber optic transceivers provide four HD network interfaces that can be used to connect to HD webcams or network access control series. FC520EGM series network management security industrial-grade isolation fiber transceiver can be used alone, or can be used with FTC-16M series chassis for integrated wiring in the central control room.

Key words:

Classification:

Products

Fiber Media Converter

Wall mounted Converter

Service Hotline:

+86 755-83110049

Messages

Product Description
Technical parameter

- Commodity name: FC520EGM one optical four grid tube type gigabit security industrial grade isolated high-definition fiber optic converter
- 网管: Network management,All
- 电口数量: 4,All
- 电口带宽: Kilomega,All
- 光口数量: 1,All
- 光口带宽: Kilomega,All
- POE: No POE support,All
- 电源: External power supply,All
- 其他功能: Support port isolation,All
FC520EGM series network management security industrial-grade isolated optical fiber converter is specially designed and developed for network high-definition cameras and network access control systems, which can ensure the stable transmission of high-definition network video streams. The FC520EGM series uses optical fiber as the carrier to convert HD network electrical signals into optical signals and carry out long-distance transmission. It can be used with TC-16M chassis for integrated cabling in central control room. The FC520EGM series of managed security industrial-grade isolated fiber optic transceivers provide four HD network interfaces that can be used to connect to HD webcams or network access control series. FC520EGM series network management security industrial-grade isolation fiber transceiver can be used alone, or can be used with FTC-16M series chassis for integrated wiring in the central control room.
Features:
- Four independent 100/1000Mbps adaptive switched twisted pair ports are provided to achieve electrical port backup and multi-user access.
- It adopts a unique switch chip design suitable for high-definition network video streaming.
- It supports the 1000Base-SX/LX optical fiber transmission standard, and can be interoperable with other manufacturers that support the 1000Base-SX/LX optical fiber transmission standard.
- The electrical port supports 100/1000Mbps and full-duplex/half-duplex automatic negotiation, and supports VLAN tag ultra-long packet transmission.
- SNMP network management is supported.
- It supports complete isolation between the four electrical ports end-to-end, and supports transparent transmission of various network protocols such as single-layer VLAN.
- It supports flow control, QoS, and STP spanning trees, and the maximum transmission distance can reach 120 km.
- It can be used in conjunction with the card-type high-definition (video) fiber optic transceiver FC520EGMC series and FTC-16M series chassis at the remote end for integrated wiring in the central control room. It supports dual power supply redundancy backup, and hot-swappable power modules to avoid fault damage caused by downtime.
- 1M built-in cache capacity, 1K or 8K built-in MAC address cache space, support up to 10KByte ultra-long data packet transmission.
- The electric port strengthens the lightning protection design, low power consumption, low heat generation, and can work stably for a long time.
- Dual redundant input power ports are provided for improved reliability.
- The design of the wall-mounted side iron shell external power supply is conducive to device installation, heat dissipation and miniaturization.
Apply:

Four-port 100/1000Mbps Gigabit isolated high-definition video surveillance Ethernet optical fiber long-distance transmission network.

Parameter	Specification
Access mode	100/1000Mbps
Standard	IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength	850nm/1310nm/1490nm/1550nm
Transmission distance	Multimode: 220m (fiber size 62.5/125μm) / 550m (fiber size 50/125μm) Dual-fiber single-mode: 10/20/40/60/80/100/120Km, single-fiber single-mode: 10/20/40/60/80/100/120Km Category 5 twisted pair: 100m
Port	4 RJ45 ports: connect STP/UTP Category 5 twisted pair cables 1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)
Conversion method	Media conversion, storage and forwarding
MAC address table	1K
Cache space	1Mbit
Flow control	Full dual state: flow control, half-duplex state: back pressure mode
Delay	<1us
Ber	<1/1000000000
MTBF	100,000 hours
LED indicator	PWR (Power Supply); FX LINK/ACT, TP1/2/3/4 LINK/ACT, TP1/2/3/4 100 (100M transfer rate over twisted pair, card only)
Power supply	DC 12V/500MA dual-input redundant backup
Power consumption	<2.5W
Operating temperature	Normal: -10~60°C, Wide temperature: -40~85°C
Operating humidity	5%~90%
Storage temperature	-40~80℃
Store humidity	5%~90% non-condensing
Installation	Wall-mounted (complete machine), rack-mounted (module card)
Size	26mm(H)140mm(W)106mm(D)/HWD(External Power Supply) 128mm(H)25mm(W)152mm(D) / HWD(Module Card)

Related Products

HA7301GD Mini 1-Port GPON OLT

Learn more

HA7302GD 2PON GPON OLT

The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .

Learn more

HA7302CS HIOSO PIZZA BOX 2PON EPON OLT

HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10～20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.

Learn more