FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
+
  • FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
  • FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
  • FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
  • FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter

FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter


The FC830AM series is a 10/100M adaptive Ethernet optical converter that supports SNMP, WEB, TELNET, and serial port network management. The FC830AMC is an office converter module inserted into the FTC-16M rack, and the FC830AM is a remote desktop converter. The iCoreView network management system enables you to monitor the working status and configure the mode of the office and remote optical converters. The FC830AM series provides users with one electrical port and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.

Key words:

Service Hotline:

  • Product Description
  • Technical parameter
    • Commodity name: FC830AM One Optical One Electric 100Mbps Network Management Fiber Optic Converter
    • 网管: Network management,All
    • 电口数量: 1,All
    • 电口带宽: 100 megabytes,All
    • 光口数量: 1,All
    • 光口带宽: 100 megabytes,All
    • POE: No POE support,All
    • 电源: Rack power supply,Built-in power supply,External power supply,All
    • 其他功能: None,All

    The FC830AM series is a 10/100M adaptive Ethernet optical converter that supports SNMP, WEB, TELNET, and serial port network management. The FC830AMC is an office converter module inserted into the FTC-16M rack, and the FC830AM is a remote desktop converter. The iCoreView network management system enables you to monitor the working status and configure the mode of the office and remote optical converters. The FC830AM series provides users with one electrical port and one optical port, with a maximum transmission distance of 120KM, supporting dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fiber transmission.

    Features:

    • The graphical management interface based on the web address SNMP protocol can be plugged into the FTC-16M rack, supports hot swapping, and supports local and remote link failure alarm (LFA) configurations.
    • It has 10M/100M, half-duplex/full-duplex adaptive function.
    • It has a store-and-forward buffer, which effectively improves the transmission efficiency of the termination equipment, realizes error detection, flow control, and reduces broadcast packets.
    • It supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation, and supports low-latency transmission.
    • It supports ultra-long packet transmission up to 1912 bytes and VLAN ultra-long packet transmission.
    • It supports QoS, ensures the transmission of VOIP packets, and supports STP spanning tree to form a redundant network.
    • It supports a variety of fiber port options such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, which expands the needs of users.
    • The iron-shell wall-mounted design of the whole machine is conducive to equipment installation and heat dissipation.

     

    Apply:

    Telecom 10/100Mbps managed 100 Gigabit Ethernet optical fiber long-distance transmission network.

  • Parameter

    Specification

    Access mode

    10/100Mbps

    Standard

    IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet,IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree

    Wavelength

    850nm/1310nm/1490nm/1550nm

    Transmission distance

    Dual-fiber multi-mode: 2Km

    Dual-fiber single-mode: 25/40/60/80/100/120Km, single-fiber single-mode: 25/40/60/80/100/120Km Category 5 twisted pair: 100m

    Port

    1 RJ45 port: connect to STP/UTP Category 5 twisted pair cables

    1 fiber port: multimode - SC or ST (fiber size 50, 62.5/125μm), single-mode - SC/FC fiber port (fiber size 9/125μm), single-fiber single-mode - SC/FC fiber port (fiber size 9/125μm)

    Conversion method

    Media conversion, storage forwarding/pass-through

    MAC address table

    1K

    Cache space

    512Kbit

    Flow control

    Full dual state: flow control, half-duplex state: back pressure mode

    Delay

    Store and forward: 9.6us, through: 0.9us

    Ber

    <1/1000000000

    MTBF

    100,000 hours

    LED indicator

    PWR (Power Supply); T100 (electrical port 100M transmission rate);TFD (electrical port full-duplex mode); TPL (Electrical Port Connection/Operation);FFD (Optical Port Full Duplex Mode),FXL (Optical Port Connection/Operation)RTL 100 (Remote Electrical Port 100M Transmission Rate)(Module Card),RTL (Remote Electrical Port Connection/Operation)(Module Card)

    Power supply

    DC 5V1A (external), AC 220V (built-in)

    Power consumption

    <2W

    Operating temperature

    -10~55℃

    Operating humidity

    5%~90%

    Storage temperature

    -40~80℃

    Store humidity

    5%~90% non-condensing

    Installation

    Wall-mounted (complete machine), rack-mounted (module card)

    Size

    128mm(H)*25mm(W)*152mm(D) / H*W*D(Module Card)

    26 mm(H) *109mm(W) *152mm(D) / H*W*D(External Power Supply)

    38 mm(H) *218mm(W) * 176mm(D) / H*W*D (built-in power supply)

Related Products


HA7302GD 2PON GPON OLT

The HA7302GD is a small-capacity 2-port OLT device launched by HiOSO Technology Co., Ltd. It can be used with HA7400 series ONUs and passive optical distribution networks (ODNs) to form a passive optical network, enabling performance management, fault management, and configuration management of the devices. The HA7302GD adopts a MINI 2PORT design, supporting two GPON optical ports, two 10 Gigabit SFP optical ports , and four Gigabit adaptive RJ45 electrical ports for uplink. With a 1: 128 optical split, the two PON ports can support up to 256 ONU devices. It supports a transmission distance of 20 km while ensuring high bandwidth , providing full line-speed L2/L3 layer forwarding capability, supporting 1.25Gbps uplink and 2.5Gbps downlink bandwidth. It supports simple local CLI serial port management ; supports remote management methods such as TELNET; supports unified network management via a graphical interface based on SNMP ; supports remote online upgrades ; supports remote terminal diagnostics; and supports rapid fault location .

Learn more

HA7302CS HIOSO PIZZA BOX 2PON EPON OLT

HA7302CS is a standalone 2-PON OLT,working with HA7200 series ONU and ODN, to establish a passive optic network. It supports 2-PON, 64 ONUs access (maximum 128). It supports 10~20km transmission distance at the base of high bandwidth, full line speed L2/L3 transition capacity. It supports WEB/SNMP/CLI management.

Learn more